14.7%

average SEC (kWh/m³) reduction, Jul–Aug 2026 — M&V report

Nestlé Waters — Ma'an bottling facility

Beverages

After Denka® Platinum Plates went online on 1 July 2026, measured specific energy consumption came in 14.7% below the adjusted baseline over July–August — 134,693 kWh avoided, with a 20.8% reduction in August alone.

≈7.0%

raw-mill kWh/t reduction, measured by SGS

Cleopatra Cement — Raw Mill

SGS measured raw-mill specific energy falling from 46.88 to 43.76 kWh/t (≈7.0%) after Denka® Platinum Plates were installed, with a 59% improvement in power-draw variance.

−16.1%

electricity consumption

FUPEL: 16.1% lower electricity consumption

A plastics manufacturer in Quito, Ecuador, saving well beyond expectations with Denka® plates installed by CANIS ENERGY.

−11.7%

electricity, production-adjusted, Sep–Oct 2026

PrintoPack: 11.7% savings while output hit a record

590 Denka® plates across seven utility accounts of a printing and lamination plant: 353,882 kWh saved in two months.

−17%

electricity consumption

ARMCON: 17% lower electricity consumption

Ready-mix concrete

Ready-mix and precast concrete production in Bahrain, running on Denka® plates since 2020 with partner Green Innova.

−7.4%

average consumption, kiln motors

Ciments d'Enfidha: up to 8.2% lower consumption on kiln motors

Denka® filter plates on the kiln workshop motors of a Tunisian cement plant, verified by two independent calculation methods.

−9.2%

whole-facility electricity, September 2026

PSF Plastic Factory: 192,837 kWh saved in one month

Preform and film production in Jeddah, across 13 transformers, in the hottest and most humid month of the year.

−14.3%

electricity per point of occupancy, Aug–Oct 2026

Soho Hotel: 14.3% less energy per guest load

Denka® Platinum in a downtown Amman hotel — lower consumption per point of occupancy while guest numbers rose by a third.

−16.8%

electricity, Jan–May 2026

Jaber Mall: 16.8% savings in the first five months

A shopping mall in Amman avoided 40,494 kWh between January and May 2026, with 12-month monitoring continuing.

−11.0%

electricity in September 2026 vs. adjusted baseline

Al Zohour: 11% savings in the first month

Food manufacturing

234 Denka® plates across a food plant’s refinery, cheese and margarine lines: 55,593 kWh avoided in September 2026.

−13.8%

on the September bill vs. 2025 — no adjustment

HOMAIN: lowest monthly consumption in 22 months

A small industrial site in Jordan cut its September bill by 13.8% year-on-year in the first month with Denka®.

≈3–4%

estimated reduction, season-controlled

Hospital Santa Ana — 24/7 hospital

Hospital

83 plates on 28 panels and 31 breakers feeding chillers, autoclaves and imaging (CT, MRI, X-ray). An IPMVP Option C analysis estimates a reduction of about 3–4%, reported conservatively.

≈8%

lower average hourly consumption, 45 days before vs after

Machine-building facility, Belgium

Machine building

18 plates installed in July 2021. Average hourly consumption over 45 matched working days fell from 10.17 to 9.34 kWh (8.14%).

≈9%

lower average hourly consumption, 26-day windows

Delivery-services facility, Belgium

Logistics & delivery

114 plates installed in September 2021. Two matched 26-day comparisons showed 9.97% and 8.52% lower average hourly consumption.

≈16%

lower average hourly consumption, 36 days before vs after

Cleaning-services facility, Belgium

6 plates installed in July 2021. Average hourly consumption fell from 5.01 to 4.19 kWh over 36 matched days (16.24%).

9.8%

harmonic distortion, down from 24.5% (BEST Energy)

Saj Ceramics — Site observations

BEST Energy recorded site observations on low-order THD. Reported with a transparent scope note: Denka® targets the 150 kHz–30 MHz band, not IEEE 519 low-order harmonics.